126-08 - EXTENSION STUD-PLATED 7/16-20

126-08  EXTENSION WHEEL STUD 7/16-20 - ARGO ATV PART


Wheel lug extender for use with the Argo # 605-77  aluminum 2.5" wheel spacer when installing tracks.  These lug extenders need to be torqued to a minimum of 40 ft. lbs and when adjusting should be tightened and never loosened to align the spacer.

For use on all Argo 8" and 9" rims.  Uses lug nut # 117-35.


6x6 models use 30.  8x8 models use 40.  Always have a few spares.


Sold each.


Carefully read the installation instructions above for your track kit.  It is very important to get the torque set correct or you could experience hub and axle failure miles from home.  Installation torque is a minimum of 40 lb ft.  When adjusting to install the spacer always tighten, never loosen.