127-156 CLUTCH, DRIVEN - INVANCE - ARGO ATV PART
Replacement CV-Tech Invance driven / secondary clutch.
Fits Argo Atv Models:Avenger 700 8x8 (See note below)*
Avenger 750 EFI 8x8
Avenger 800 8x8
Conquest Pro 800 XT 8x8
Conquest Pro 1050 XTD 8x8
Frontier 6x6
Frontier 8x8
HD 650 6x6
HD 700 8x8
HDI 750 6x6
HDI SE 8x8
HDI 750 8x8
Huntmaster 8x8
Outfitter 8x8
Scout 6x6
Scout 8x8
XTD 8x8
XTI 8x8
*Requires the following parts if replacing an older style 127-136 clutch on an Avenger 700 8X8 from serial # NV25040, if your serial number is BEFORE this number you will also need to update the input shaft on your transmission to get the new clutch to fit. See the attached bulletins. These parts are not required if you already have an Invance 127-156 clutch and are replacing it on any 2007 or newer model from NV25040 and newer.
Extra Parts are needed if your vehicle serial number is before NV25040
(1) 34-130 Shaft, Input - 19/15T Spline (Updated, you will need to spit your transmission and replace these part you may also want kit K-401 to do the rebuild)
(1) 107-14 Retaining Ring LC-125-PA
(1) 107-15 Retaining Ring SHR-098-PA
(1) 108-85 Washer, Retaining Thrust
(1) 108-84 Engine clutch spacer
(1) 112-164 HHCS 3/8 - 16X3.5 GRS bolt
(1) 110-03 Key 1/4X3/16X2.375 RC46
Extra parts needed if your vehicle vin is NV25040 or after
(1) 108-84 Engine clutch spacer
(1) 112-164 HHCS 3/8 - 16X3.5 GRS bolt
(1) 110-03 Key 1/4X3/16X2.375 RC46
Replaces: 127-136 (See notes above before ordering)