166-13 - CALIPER, HYD BRAKE - RIGHT

166-13  CALIPER, HYDRAULIC BRAKE HD RIGHT - ARGO ATV PART


Caliper used on all 2016 and newer models.  Replaces the 166-11 caliper on the below models.  This caliper has a revised piston diameter as well as casting thickness and newly upgraded casting half bolts for use with the Admiral Transmissions.  See the notes below for the required additional parts on select models below.  Read the bulletin for additional information by clicking the Bulletins Tab above.  Does not include brake pads.

Right side caliper when seated in the vehicle.


Exact Fitment for the following Argo Atv Models:

HD 650 6x6
HD 700 8x8
HDI 750 6x6
HDI SE 8x8
HDI 750 8x8
HuntMaster 8x8
Outfitter 8x8
Scout 6x6 (2016 and Newer)
Scout 8x8 (2016 and Newer)
XTD 8x8
XTI 8x8


The Following Models that Require Additional Parts / Special Installation  (Read Bulletin Tab Above):

Avenger 700 8x8
Avenger 750 EFI 8x8
Frontier 480, 580, 650 6x6
Frontier 650 8x8
Scout 6x6 (2015)

The above models require the following additional parts for each caliper replaced to the new upgraded style.

(2)  105-43 BUSHING, .37 X .03 WALL X 2.1 LONG


Fits the Following Older Argo Models That Require The Following Additional Parts:

Bigfoot 6x6
Conquest 6x6
Conquest 8x8
Magnum 6x6
Magnum 8x8
Response 8x8
Vanguard II 6x6
Many Older 1980's Models (Call for reference)


The above models require the following additional parts for each caliper replaced to the new upgraded style.

(2)  10034J   COTTER KEY, BRAKE PADS 3.0"
(1)  160-44     BANJO, BOLT M10 X 1.0 X 21
(2)  10032J     COPPER CRUSH WASHER


* For additional information click on the Bulletin tab above for installation and caliper information.  Caliper is compatible either with the 170-01 or 170-03 brake pads that were originally used on your model above.

Replaces:  166-02, 166-06, 166-02RM, 166-11