4 Wheel Amphibious Trailer (Up to 2010)
* Reference the bearings in the image to be sure your bearings were not upgraded to HD style bearings if you are working on a recently purchased used vehicle. If working on models older than 1990 please reference your Argo Parts manual for fitment.
This kit fits any axle position. You will reuse your inner flanges and hardware. You will remove the seals from your outer flange and press the new ones in.
The kit contains Argo OEM (Original Equipment Manufacturer) bearings and axle. If you want to save additional money you can order the kit with aftermarket bearings by ordering kit K-139SBA-AM
This kit can also be used on 1993 - 2009 models with or without
the bearing extensions installed on the front or rear axles. A bearing extension is referenced in the images below if you have either installed on the front or rear axles of your Argo you can only use this kit on any axle position. Kit Contains:
(1) 10744C (OEM) HD AXLE
(1) 101-35 (OEM) OUTER 1.25" BEARING
(1) 101-41 (OEM) INNER 1.0" BEARING
(1) 10022J OIL SEAL 102-14 (OUTER FLANGE) 1.25 X 1.75 X .188
(1) 10023J OIL SEAL 102-15 (OUTER FLANGE) 1.25 X 1.874 X .25
(2) 605-89 CORK GASKETS
* Kits are sold each.