This kit is a Front or Rear axle and standard bearing replacement kit that includes the new style OEM HD axle. You will reuse your outer 4 hole greaseable flange and press the new seals into it.
Frontier 650 8x8 (2008 - 2009 Front or rear if bearing extensions are installed)This kit will also work on the following models if the optional bearing extensions were installed on the front or rear of the vehicle (Image Below):
Frontier 480 6x6
Frontier 580 6x6
Frontier 650 8x8
* Reference the bearings in the image to be sure your Argo has not been upgraded to the HD bearings especially if you are working on a recently purchased used vehicle.
The kit ships with aftermarket axle bearings and the OEM HD Axle. The aftermarket bearings are manufactured for Argo Adventure by a quality bearing manufacturer and are constructed to the same amphibious design requirements as the OEM Argo bearing. If you want OEM bearings order kit K-141SBA.
(1) 10744C (OEM) AXLE HD
(1) 101-35AM (AFTERMARKET) OUTER 1.25" BEARING
(1) 101-41AM (AFTERMARKET) INNER 1.0" BEARING
(2) 605-89 CORK GASKETS
(1) 10022J OIL SEAL 102-14 (OUTER FLANGE) 1.25 X 1.75 X .188
(1) 10023J OIL SEAL 102-15 (OUTER FLANGE) 1.25 X 1.874 X .25
(2) 605-63 4 HOLE FLANGE NON-GREASEABLE
(1) 606-92 4 HOLE FLANGE GREASEABLE
(1) 606-25 BEARING EXTENSION CORK GASKET
* Kits are sold each.