K-143SBA (OEM) STANDARD BEARINGS / OUTER FLANGE & FRONT OR REAR AXLE KIT (2002 - 2006 CONQUEST)
OEM HD AXLE
This is a Front / Rear axle and standard bearing replacement kit that includes the new style OEM HD axle. Includes the outer 4 hole greaseable flange with the seals already pressed in along with new inner flanges and cork gaskets. You will reuse your mounting hardware.Fits Argo Atv Models:
Bigfoot 6x6 (2002 - 2006 has extensions installed on front axle)
Conquest 6x6 (1994 - 2006)
Conquest 8x8 (1994 - 2006)
Can also be used on the front or rear of the following models if the bearing extension in the below image has been installed on the front or rear of the vehicle:
Bigfoot 6x6 (2002 - 2006 can also be used in the rear if extensions are installed)
Response 8x8 (2002 - 2006)
Vanguard II 6x6 (2002 - 2006)
Vanguard 6x6 (2002 - 2006)
* Reference the bearings in the image to be sure your Argo has not been upgraded to the HD bearings especially if you are working on a recently purchased used vehicle. If your front or rear axles do not
have the bearing extensions installed on the above models you will need to order kit # K-140SBA. It is critical you know your year for this kit to work if you are unsure please call us with your Argo Serial number and we can look it up for you.
The kit contains Argo OEM (Original Equipment Manufacturer) bearings and OEM HD axle.
(1) 10744C (OEM) AXLE HD
(1) 101-35 (OEM) OUTER 1.25" BEARING
(1) 101-41 (OEM) INNER 1.0" BEARING
(2) 605-89 CORK GASKETS
(1) 605-97 OUTER FLANGE GREASEABLE WITH SEALS INSTALLED
(2) 605-63 4 HOLE FLANGE NON-GREASEABLE
(1) 606-92 4 HOLE FLANGE GREASEABLE
(1) 606-24 BEARING EXTENSION CORK GASKET
* Kits are sold each.