Replacement HD 1.25" outer bearing, standard 1" inner bearing, cork gasket, outer greaseable flange and bearing seat kit. Can be used on the front, mid or rear axles if your Argo does not have bearing extensions installed on the front or rear of the vehicle. A bearing extension is the part in the image below. If your Argo does have the bearing extension installed and you need a kit for them order # K-171HDBFits All Argo Atv Models 2010 - 2017*:
Avenger 700 8x8 (2010 and Newer)
Avenger 750 EFI 8x8 (2010 - 2016)*
Frontier 6x6 (2010 - Feb 2018)
Frontier 8x8 (2010 - Feb 2018)
HD 650 6x6
HD 700 8x8
HDI 750 6x6
HDI SE 8x8
HDI 750 EFI 8x8*
Scout 6x6 (2015 - Feb 2018)
Scout 8x8 (2015 - Feb 2018)
Will replace other Argo models bearings if a HD bearing kit was installed in place of the standard bearing set-up. Look at the bearings in the image to compare. Will not work on the Centaur, Outfitter, XTD or XTI models. Will not work on any model with Aluminum bead lock rims and 1.375" extreme duty axles.
* If you model is a 2017 or newer Argo Avenger with steel off-set or aluminum rims or is a 2016 model with the Aluminum beadlock rims your outer bearings are 1.375" size and you will need to order kit K-172HDB.Kit Includes:
(1) 101-95B OUTER HD 1.25" BEARING 72MM
(1) 101-41 INNER BEARING 1.0"
(1) 606-89 BEARING CARRIER
(1) 606-88 OUTER GREASEABLE FLANGE
(1) 606-90 CORK GASKETS 72MM
* Kits are sold each.