Replacement outer HD 1.25" bearing, inner 1" bearing, HD cork gaskets, HD greaseable outer flange and HD bearing seat. Used on the front or rear axles if your Argo has bearing extensions installed on the front or rear of the vehicle.Fits Argo Atv Models:
Avenger 700 8x8 (2010 and 2015)
Avenger 750 EFI 8x8 (2010 to 2016)*
Frontier 6x6 (2010 - Feb 2018)
Frontier 8x8 (2010 - Feb 2018)
HD 650 6x6
HD 700 8x8
HDI 750 6x6
HDI SE 8x8
HDI 750 EFI 8x8*
Scout 6x6 (2015 - Feb 2018)
Scout 8x8 (2015 - Feb 2018)
Will replace other Argo models bearings if an HD bearing kit was installed in place of the standard bearing set-up. Look at the bearings in the image to compare.
* If you model is a 2017 or newer Argo Avenger with steel offset or aluminum rims or is a HDI 8x8 or Avenger 8x8 2016 model with Aluminum beadlock rims your outer bearings are 1.375" size and you will need to order kit K-173HDB.
A bearing extension is the part in the image below. If your vehicle does not have these extensions and you have HD bearings installed you need to order kit #K-171HDB. This kit will NOT work on any model with the Aluminum bead lock rims and extreme duty axles.Kit Includes:
(1) 101-95AM OUTER HD 1.25" BEARING 72MM
(1) 101-41AM INNER BEARING 1.0"
(1) 606-89 BEARING CARRIER
(1) 606-88 OUTER GREASEABLE FLANGE
(3) 606-90 CORK GASKETS 72MM
* Kits are sold each.