WE ARE OPEN! HAVE A PARTS OR TECHNICAL SUPPORT QUESTION? CALL US AT 1-888-898-2746.

101-35AM (AFTERMARKET) BEARING, BALL 1.25" ID - OUTER BEARING STD

Your Price (USD): $29.90
101-35AM (AFTERMARKET) BEARING, BALL 1.25" ID - OUTER BEARING STD - ARGO ATV PARTS
Part Number: 101-35AM
Weight (lbs): 0.75
H.S. Code: 8482.10.50.52

101-35AM  (AFTERMARKET) BEARING, BALL 1.25" ID - OUTER BEARING STD - ARGO ATV PART

AFTERMARKET BEARING


Aftermarket Standard Outer Axle Bearing 1.25" ID x 62mm triple-sealed manufactured specifically for Argo Adventure to the same quality as the OEM bearing.


Fits Argo Atv Models:

All models from years 1991 to 2009.


Reference your parts manual for models prior to 1992 as Argo used this bearing on select models before 1992 as well as the 101-29 locking collar bearing.


* Sold each.  Also available in an OEM version order part 101-35.


If your Argo is a 2010 or newer you will need to order outer bearing # 101-95B or 101-123.  Check your parts manual and year.


Installation Note:

This aftermarket bearing will also work on the 810-59 idler shafts but you will only use one set-screw to lock it in place.

This bearing features two small holes on the race of the bearing.  When installing the bearing be sure the hole on the top left of the race aligns with the grease zerk at the 12 o'clock position on the outer flange so the bearings balls can get grease.  Any time you replace this bearing be sure to always replace your flange seals and round cork gaskets.

RELATED ITEMS

RECENTLY VIEWED ITEMS